User Manual

Barcode Upload Mode
Below configurations are only applied for 2.4GHz wireless mode.
If you are heading for a working area which lies outside the signal range, you may activate the offline
mode of the scanner, following the steps described below. Under this enhanced offline mode, all scanned
data will be stored directly into the buffer memory of the device. Furthermore, the data entries will be
permanently saved in the buffer memory prior to the manual upload into the working station, so that you
may upload them time and again to your liking.
1). By scanning the following barcode, the offline mode will be activated
Offline Mode
2). By scanning the following barcode, all data in the buffer memory will be deleted
Clear all Memory
3).By scanning the following barcode, all data entries in the buffer memory can be manually uploaded after
reconnecting to the working station.
Upload the Data
4). By scanning the following barcode, the gross quantity of the uploaded data entries will be
summarised .
Summarising of uploaded data entry quantity
5). By scanning the following barcode, the device leaves the offline mode, normal mode will be
reinitialised.
Quit offline mode *