User manual

Technical data
7
3 Technical data
Type:
PKL...
Weight
of piston
[kg]
Force of
impact *
[kg]
Optimum
operating
pressure
[bar]
Air consump-
tion/impact at opti-
mum pressure
[Nl]
Overall
weight
[kg]
Suitable
for wall
thickness
of...
[mm]
190/4 0.19 0.43 4.0 0.20 0.8 1 - 2
190/6 0.19 0.60 6.0 0.20 0.8 1 - 2
450/4 0.44 0.56 4.0 0.40 1.6 1 - 3
450/6 0.44 0.92 6.0 0.60 1.6 1 - 3
740/3 0.74 1.30 3.0 0.50 2.6 2 - 4
740/4 0.74 1.80 4.0 0.70 2.6 2 - 4
740/5 0.74 2.10 5.0 0.80 2.6 2 - 4
740/6 0.74 2.70 6.0 1.00 2.6 2 - 4
2100/4 2.10 4.20 4.0 5.20 6.7 3 - 5
2100/5 2.10 6.20 5.0 6.50 6.9 3 - 5
5000/4 4.96 6.60 4.0 5.70 16.0 4 - 8
5000/6 4.96 10.60 6.0 8.60 16.5 6 - 12
10000/6 10.00 17.50 6.0 15.10 34.0 > 10
*) The force of impact corresponds to the impact of the given weight falling from a height of 1 m.
The type designation of the PKL has the suffix /3, /4, /5 or /6. The suffix is
derived from the optimum operating pressure, i.e. the PKL 740/4 achieves
the optimal effect at an operating pressure of 4 bar.
Drive
medium
NetterVibration recommends operating the PKL with clean, oiled com-
pressed air.
Filter
≤
5 µm, quality class in accordance with ISO 8573-1
The PKL are, in principle, suitable for operation with oil-free compressed
air or nitrogen .
Lubrication ISO viscosity class in accordance with DIN 3448, VG 5 bis 15
Fill mist lubricator with acid- and resin-free compressed air oil.
Recommendation for temperatures
of up to 60 °C:
Klüber „AIRPRESS 15"
Recommendation for temperatures
over 60 °C with HT-versions:
Aral „Farolin U“ lubrication oil
Ambient
temperature*
Standard: -20 °C to 60 °C HT versions: -20 °C to 160 °C de-
pending on version
The permissible ambient temperatures must not fall below or exceed the
above temperatures during operation.
Operating
pressure*
Operating pressures must be between 2,0 bar and 6,0 bar.
The actual air pressure set on the regulator must not exceed the optimum
operating pressure by more than 1 bar.
Impact
frequency
The following impact sequence must not be exceeded:
Maximum 10 strokes in sequence at an impact frequency of
15 strokes/min and 180 strokes/h.
*) Higher operating pressures and temperatures are permitted only after consultation with and written consent
by the application technicians of NetterVibration.
Parameters
Type
designation
Permissible
operating
conditions