User manual

General information
3
1 General information
Before installing the PKL read these operating instructions carefully. It is
the basis for any action when dealing with the PKL, and may be used for
training purposes. The operating instructions should be subsequently
stored at the operation site.
The target group for these operating instructions is technical staff, who
have basic knowledge in pneumatics and mechanics.
Therefore, only staff who are trained in these fields may work on the PKL.
The PKL may only be installed, put into operation, maintained, troubleshot
and disassembled by persons authorised by the operator.
This documentation is protected by copyright.
NetterVibration reserves all rights such as translations, reprinting and re-
production of the operating instructions, as well as parts thereof.
All technical information, data and instructions for installation, operation
and maintenance in these operating instructions are based on the latest
information available at the time of printing and take our past experience
to the best of our knowledge into account.
No claims can be derived from the information, illustrations and descrip-
tions in these operating instructions.
The manufacturer does not assume liability for damages resulting from:
• failure to observe the operating instructions,
• improper use,
• unauthorised repairs,
• technical modifications,
• use of non-permissible spare parts.
Translations are made to the best of our knowledge.
NetterVibration does not assume liability for translation errors, even if the
translation was made by us or on our behalf. Only the original German text
remains binding.
The pneumatic impactors of the series PKL comply with the EC Machinery
Directive 2006/42/EC.
In particular, the standard EN ISO 12100 has been observed.
• high impact force
• low air consumption
• reduced sound level due to an elastomer impact plate
Use and
storage
Target group
Copyright
Limitation of
liability
Directives /
standards
observed
Special fea-
tures of the
PKL