User manual

Installation
14
NetterVibration delivers the appropriate fastening devices for installation
of the PKL:
weld-on consoles or weld-on plates (±0.3 mm flatness)
• Weld the consoles directly onto the container walls.
• Weld the plates onto previously mounted saddle plates (1.5 times the
sheet thickness of the container).
Weld-on console, plane (left) and round (right)
Weld-on plate
1
Saddle plate
2
Weld-on plate
3
EE kit
4
NBS G (fastening set for
tapped hole)
For safe and permanent fixation of the PKL to the device use the compul-
sory fastening kits.
The following versions are available for every PKL type:
Description Difference
NBS ... G (e.g. NBS 5000 G) for tapped hole
NBS ... D (e.g. NBS 740 D) for through-hole
NBS ... (e.g. NBS 190) without screws
... corresponds to the PKL type: 190 / 450 / 740 / 2100 / 5000 / 10000
Fastening
devices
Fastening
kits