User manual

Transport and storage
11
5 Transport and storage
Special transport conditions are not required.
When moving the PKL 10000, use the mounted transport lugs at the top of
the housing.
The PKL are packed and ready for assembly. Accessories and add-on
parts are delivered unmounted, unless otherwise agreed upon.
The packaging protects the PKL from transport damage. The packaging
material has been selected from an environmentally safe and technically
disposable point of view and is therefore recyclable.
The return of packaging to the material cycle conserves raw materials and
reduces the amount of waste.
1
Plastic fastening
4
Corrugated cardboard disc
2
Damper ring (for steel impact plate)
5
Damper plate (flange)
3
Impact plate
The PKL 2100, PKL 5000 and PKL 10000 are delivered with a transport
safety device at the bottom. The transport safety device consists of 2 plas-
tic fastenings and a corrugated cardboard disc. It prevents the impact plate
from falling out during transport and must be removed before installation.
Take care that the impact plate and damper plate retain their position on
the PKL, as they must be mounted with the PKL.
• Store the PKL in a dry and clean environment.
• The storage temperature is between -20 °C and +60 °C.
• Close all openings when re-storing.
• Preserve the PKL before storage:
1. Screw or clamp the PKL on a plate. The impact plate of the PKL
2100, PKL 5000 and PKL 10000 must be inserted.
2. Apply anti-corrosion oil to the air inlet and briefly activate the PKL.
Transport
conditions
Packaging
Transport
safety device
PKL
2100 /
5000 /
10000
Storage