Datasheet

Applications
Series PKL pneumatic impactors are particularly
suitable for knocking stubborn residues from
walls, pipes and containers.
Examples of applications include: elimination
of tubeforming, bridging and evacuation of
residues.
Design and Function
The impact (similar to a hammer) is created by
the piston. With PKL 190 to 740 the impact
is produced directly against the surface upon
which the impactor is mounted. From PKL 2100
to PKL 5000 and PKL 10000 the piston hits
the base plate. The compressed air pushes
the piston against one or two springs.
The fast exhausting of the piston chamber
causes the piston to strike abruptly against
the impact surface. Series PKL impactors can be
operated using nonlubricated compressed air.
A directional control valve is necessary for
activation (not included).
The maximum impact sequence is 10 impacts
in a row, at a rate of 15 impacts per minute
and 180 impacts per hour.
Permissible Operating Conditions:
Drive Medium:
Compressed air or nitrogen (filter ) 5 µm),
Preferably with oil mist
Operating Pressure:
2,5 bar to 6 bar
Ambient Temperature:
–20ºC to 60ºC
HT version up to 160ºC
Netter provides solutions.
Consult our experienced application
technicians.
Sound protection hoods
Applications
The use of hoods is particularly worthwhile
for bunkers with insulation covers.
Attaching the sound protection hood to the
insulation cover fully insulates the source of
the noise (bunker).
Netter Pneumatic Impactors
Series PKL
Cleaning bunker walls Cleaning weighing containers
Applications
Series VAC vacuum fixing devices serve the fast
fixation of impactors on smooth or, under
certain circumstances, rough or curved surfaces.
They allow quick and simple attachment without
welding or screwing.
Design and Function
As soon as compressed air is supplied to the
VAC mounting, the device is sucked tight,
ensuring a forcelocked connection between
the impactor and the mounting surface.
ATEX compliant mountings and units with
stainless steel plates are available.
Vacuum Fixing Devices VAC
NetterVibration offers the accessories required
for the mounting, installation, control and
monitoring of vibrators and impactors.
Cleaning pipes
Netter GmbH
Germany
Fritz-Ullmann-Str. 9
55252 Mainz-Kastel
Tel. [phone]
Poland
Al. W. Korfantego 195/17
40-153 Katowice
Tel. [phone]
Switzerland
Erlenweg 4
4310 Rheinfelden
Tel. [phone]
Spain
Errota Kalea 8
20150 Villabona-Guipúzcoa
Tel. [phone]
www.NetterVibration.com
[e-mail]
10/2017 Subject to change without notice