Instructions

12
6 Installation
WARNING
Installing the vibrator:
WARNING
WARNING
Ensure that the compressed air is switched
off during installation or any work on the
vibrator and the supply lines.
Do not use thread pieces longer than
intended for compressed-air connections.
Under no circumstances must parts of
Teflon sealing tape get into the vibrator.
Depending on purpose NTK 8 AL to NTK
40 can be bolted either with the housing or
the piston.
Housing
fixing
Piston
fixing
For the devices NTK 55, NTK 85 and
NTK 110 use at least 4 of the holes to be
found in the housing for fastening the
housing on to the mass to be vibrated.
For the bolts the following torques apply:
Type
Thread
Torque [Nm]
NTK 55
M 8
23
NTK 85
M 10
51
NTK 110
M 12
87