Instructions

5
2 Safety
Correct use:
The linear vibrators are intended for
installation into machines. These machines
use linear vibrators for discharging
hoppers, as drives for conveying troughs,
sieves and vibration tables.
All other uses are deemed to be improper
use.
WARNING
WARNING
WARNING
Qualification of the authorised technical
staff:
The linear vibrators may only be installed,
put into operation, serviced and faults
rectified by authorised, qualified specialists.
Responsibility for handling the pneumatic
linear vibrators lies with the operator.
Accessories that guarantee correct
operation and safety must have the
appropriate protection type for the specific
purpose.
DANGER
Netter GmbH accepts no liability for damage to property or personal injury
if technical modifications are made to the product or the instructions and
specifications in these operating instructions are not observed.
Source of danger:
Faulty hose connections
Possible consequences of disregarding:
A hose coming loose when under pressure can
cause injuries.
Avoiding the danger:
The hose lines must be securely connected. The
connections must be regularly checked and the screw
connections tightened where necessary.
Source of danger:
NTK linear vibrators work with compressed air.
Possible consequences of disregarding:
A hose coming loose when under pressure can
cause injuries.
Avoiding the danger:
When working on the NTK ensure that the
compressed air to the inlet pipes is switched off.
Source of danger:
Vibrators and parts of the construction can become
loose due to the vibrations.
Possible consequences of disregarding:
Falling parts can lead to damage to persons and
equipment.
Avoiding the danger:
Screw locking media and/or Loctite, etc. must be
used.
Screw connections must be inspected and, if
necessary, re-tightened after 1 hour of operation
and thereafter regularly (as a rule monthly).
Securing with a steel cable is stipulated for critical
installation situations.