Instructions

Information on the NEA and NEG

Netter electric external vibrators of the series

NEA and NEG comply with the EC machin-

ery directive 2006/42/EC, the electromagnet-

ic compatibility directive 2014/30/EU and the

low voltage directive 2014/35/EU.

In particular, the standards DIN EN ISO

12100, DIN EN 60529 and DIN EN 60034-1

have been complied with.

The electric external vibrators or the series

NEA and NEG comply with the directive

2014/34/EU for the equipment group II and

are suitable for use in potentially explosive

areas of the category 3D in the zone 22. The

standards DIN EN 60079-0 and 60079-31 in

particular have been observed.

Special features:

• adjustable centrifugal force

• all vibrators are impregnated for tropical use by vacuum casting or by trickle

impregnation.

• 100% duty cycle

• degree of protection IP 66 (DIN EN 60529), housing size 50 and 60: degree of protection

IP 65

• insulation class F

• high rate of efficiency due to silicon electrical sheets

• terminal box integrated in housing foot (housing sizes 101 to 120)

• smallest mounting dimensions

• stainless steel covers

• sound level measured in the open  70 dB(A) according to IEC

• from housing size 170 upwards, equipped with PTC thermistors by default

• earthing screw on housing and in terminal box