Instructions

18
Unbalance lamella discs of the type XLs
Adjustment of the unbalances is carried out according to a scale disc or the supplementary
sheet in the terminal box of the unit. By rotating the outer, adjustable unbalance disc(s) to
another position, the percentage of the centrifugal force changes as shown in the illustration
below. The grid position is defined by position pins.
Settings:
Example:
The NEG 50120/50 Hz has a total of 6 unbalance
discs (3 discs per side: 2 fixed, 1 adjustable). If a
centrifugal force of 88% is desired, the adjustable
unbalance discs are rotated anticlockwise on
both sides into the fourth grid position.