Instructions
Table Of Contents
Transport and storage
14
5 Transport and storage
Observe the safety instructions in Ch. Safety, from page 6 on.
Please refer to the brochure for weights and dimensions.
When transporting the NEA/NEG, ensure that the NEA/NEG is not sub-
jected to strong impacts or vibrations that could damage the bearings.
Please observe the following notes:
Use only the transport eyelet/eyelets (1) for lifting the NEA/NEG. If the
vibrator is fitted with two transport eyes, both must be used for lifting.
The pulling direction must not exceed 45°.
Lifting tools are of the usual kind such as a pulley or a crane. When
moving loads, use suitable steel cables or hoisting slings which are suf-
ficiently dimensioned for these weights.
Handle the NEA/NEG very carefully during transport.
The NEA/NEG are packed ready for installation.
The packaging protects the NEA/NEG from transport damage. The pack-
aging material has been selected from an environmentally safe and tech-
nically disposable point of view and is therefore recyclable.
The return of packaging to the material cycle conserves raw materials and
reduces the amount of waste.
Store the NEA/NEG in a dry and clean environment.
The permissible storage temperature is between -15 °C and +60 °C.
The permissible relative humidity is max. 60 %.
The storage time is max. 2 years.
If the vibrator is operated in areas with potentially explosive dust
(zone 21 or 22) a revision at
Netter
Vibration is mandatory after a stor-
age time of more than one year.
Do not store the NEA/NEG outdoors. The electrical components are
not protected against corrosion.
Transport-
conditions
Packaging
Storage