User's Manual

this function.

1. SSID: The SSID is a unique name shared among all points in your wireless network. The

SSID must be identical for all points in the network. It is case sensitive and must not exceed

32 characters. The default SSID for 11a Interface is wireless_11a.

2. Channel: The channel shared by all wireless devices. The range of channel is 1~14.

3. WEP: Short for Wired Equivalent Privacy, a security protocol for wireless local area

networks (WLANs) defined in the 802.11a standard. WEP is designed to provide the same

level of security as that of a wired LAN. Select None to disable this function.

There are two WEP Encryption key length: 64-bit(10 hex digits) 128 bit(26 hex digits) and

152 bit(32 hex digits).

n Data Rate: Specify the transmit and receive data rate. Select the desired rate from the

drop-down menu.

n Transmit Power: Specify the level of the transmit power. Use the drop-down menu to

specify the value of the transmit power.

n Beacon Interval (20~1000): Beacon transmissions announce the existence of 802.11

network at regular intervals. Enter a value between 20 and 1000 to specify the Beacon

Interval.

n Data Beacon Rate (1~16384): Specify the Data Beacon Rate. Enter a value between 1

and 16384 that specify the Delivery Traffic Indication Message (DTIM).

n Fragment Length (256~2346): Enter a value between 256 and 3346 to specify the

Fragment Length.

n RTS/CTS Threshold (256~2346): Packets large than the value are preceded by an

RTS/CTS handshake. Enter a value between 256 and 2346 to specify the value of the RTS

/CTS Threshold.