User's Manual

For LAN, it displays AP’s IP address, MAC address, and Subnet Mask. It also displays the IP

address of the DNS and the number of clients connected by DHCP server.

For Wireless 11a, it displays SSID, Channel, WEP security status, and wireless MAC address

of the 11a adapter.

For Wireless 11g, it displays SSID, Channel, WEP security status, and wireless MAC address

of the 11g adapter.

For System Information, it displays system time, firmware version, firmware date, hardware

version, and serial number.

You can obtain the most up-to-date information by pressing the “Refresh” button.

5.1.5 Reset

In the event that the access point stops responding correctly or in some way stops functioning,

you can perform a reset. Your settings will not be changed. To perform the reset, click on the Reset

button below. You will be asked to confirm your decision. The reset will take about 18 seconds.