User Manual

AirMagnet A5200 Sensor User Guide
Chapter 3: Installing A5200 Sensor 15
See the A5231 Mounting Bracket Installation Guide for detailed
instructions on how to use the A5231 Mounting Bracket.
Installing A5200 Sensor with A5031 Mounting Bracket
The A5200 Sensor is backward-compatible with the A5031 Sensor
Mounting Bracket, which not only gives users the same flexibility to
mount the Sensor anywhere they desire, but also offers an additional
security feature that helps prevent the Sensor from tampering and
theft.
To install your A5200 Sensor Using an A5031 Mounting Bracket:
1) Install the A5031 Mounting Bracket where the Sensor is to be
deployed.
Figure 3-1: Assembling the A5031 Mounting Bracket
2) Remove the rubber pads from the A5200 Sensor’s bottom cover.
3) Mount the A5200 Sensor onto the A5031 Mounting Bracket.
Make sure that the four metal knobs on each corner of the Sensor
Adapter Plate are aligned with and set inside the holes on the four
corners of the A5200 Sensor’s bottom cover.
A5200 Sensor User Guide.book Page 15 Thursday, January 15, 2009 2:00 PM