User's Manual
Table Of Contents
- User Guide
- Table of Contents
- Definitions and Terminology
- References
- Introduction
- Expert Analysis Functions Enabled by Sensor
- Enforce Security Policy
- Detect Wireless Intruders and Attacks
- Lock In Network Performance
- Ensure Network Reliability
- Centralizing System Management
- Enable Flexible Configuration and User Access
- Enable Graphics User Interface from Anywhere in the Network
- Enable Remote Troubleshooting and Active Tools
- Low Overhead On Operational Network
- AirMagnet Sensor Operation Modes
- Hardware Specifications
- Sensor Powering Options
- Appendix A: FIPS-Required Features
- Use of TLS Protocol for Secure Communication
- Limited Logon Attempts
- Length of Password Word
- Automatic Self Checking and Module Integrity Checking
- Change of Shared Secret Key via Secure Communication
- Password Encrypted in FIPS-Approved Algorithms
- Securing the Sensor with the Tampering-Proof Tape
- Periodical Inspection of the Module for Evidence of Tamperin
Effective Data Rates
802.11a
6, 9, 12, 18, 24, 36, 48, 54
802.11g
6, 9, 12, 18, 24, 36, 48 & 54Mbps
802.11b
1, 2, 5.5, 11Mbps
Physical Interfaces
Network port
RJ45 Ethernet with POE powering option
10/100 Base T
Serial Port
RS232 DB9
115,200 bps; 8 data bits; no parity; 1 stop bit; no flow control
Internal
Processor
IDT RC32438 200Mhz
Memory
64 Mbytes RAM
8 Mbytes FLASH
Radio
Dual radio – 802.11 a & b/g
Atheros MAC and PHY
Compliance
FCC Part 15C
CE 0560
EN60950 (equivalent UL ETSI 300/328)
IC (Canadian Radio Regulations)
Japan Equipment Radio Regulations
© 2004 AirMagnet
®
, Inc. All rights reserved. 15