User Manual

Profile

This profile page allows users to save different wireless settings, which helps users to get access

to wireless networks at home, office or other wireless network environments quickly.

Items Information

Profile Name Choose a name for this profile, or use default name defined by system.

SSID Fill in the intended SSID name or use the

drop list to select from available

Aps.

Network Type There are two types, infrastructure and 802.11 Ad-

hoc modes. Under

Ad-hoc mode, you could

also choose the preamble type; the available

preamble type includes auto and long. In addition to that, the channel

field will be available for setup in Ad-hoc mode.

Authentication Authentication mode.

Encryption Encryption mode.

Use 802.1x Whether or not use 802.1x feature.

Channel Channel in use for Ad-Hoc mode.

Power Save Mode

Choose from CAM (Constantly Awake Mode) or PSM (

Power Saving

Mode).

Tx Power Transmit power, the amount of powe

r used by a radio transceiver to send

the signal out.

RTS Threshold For adjusting

the RTS threshold number by sliding the bar or key in the

value directly. The default value is 2347.

Fragment

Threshold

Adjust the Fragment threshold number by sliding the

bar or key in the

value directly. The default value is 2346.

To add a new profile:

1. Click the Add button. The add profile window pops up.

Note: you could also add a new profile quickly by selecting an available network in the

Network function then click the Add to Profile button.

2. Fill in information for this profile in the system config section: