User Manual
30
HT (Hyper Throughput) Physical Mode
Items Information
Operating Mode
Select the mixed or green field mode as the
operation mode.
Channel Bandwidth
Select the 40Mhz or 20/40Mhz as the channel
bandwidth.
Guard Interval
Select 400ns or 800ns as the interval time.
Aggregation MSDU
Mark to enable Hyper Throughput TX Aggregate
MAC Service Data Unit, and clear to disable.
Auto Block ACK
Select to block ACK (Acknowledge Number) or
not during data transferring.
Decline BA Request
Select to reject peer BA-Request or not
* Please click on the Save Settings button or the Reset Settings button on the above table
to save/reset the configurations.
Security Settings
The Security function protects your wireless network from invasion. We provide WEP
and WPA encryption to secure your wireless network. As default, the authentication is
configured as safe mode. Please select None/WEP/WPA (Personal) in the drop list. If
you select none, any data will be transmitted without encryption and any station can
access the router.
Items Information
SSID choice
Please choose a SSID you have set for this
router in the Wireless Settings > Basic Settings
from the drop-down list. The SSID will be shown
on the wireless network for recognizing.
Security Mode
There are 6 modes for you to select: Open,
Shared, WEP Auto, WPA-PSK, WPA2-PSK, and
WPA-PSKWPA2-PSK. Please refer to the
following description.