User Manual

26
TCP/IP Setting
LAN Interface Setup
To set up the configuration of LAN interface, Private IP of you router LAN
Port and Subnet mask for your LAN segment.
Configuration
IP address The IP of your Router LAN port (Default 192.168.1.1)
Subnet Mask Subnet Mask of you LAN (Default 255.255.255.0)
DHCP Server
To give your LAN Client an IP, you have to enable “DHCP
Server”. If not, manual setting up your client IP is necessary
when you want to use the router as your client’s default
gateway.
DHCP Client
Range
Specify the DHCP Client IP address range. You can also click
the “Show Client” button to listed those connected DHCP
clients.
Domain Name Specify a domain name of the device.
802.1d
Spanning tree
To prevent from network loops and preserve the quality of
bridged network
Enable UPnP
Mark
this checkbox to allow this router to be recognized by
uPnP.