User Manual

21
Fragment
Threshold
To specifies the maximum size of packet during the data
transition. The lower values you set, the worst performance it
will be.
RTS Threshold
If the packet size is smaller the RTS threshold, the wireless
router will not send this packet by using the RTS/CTS
mechanism.
Beacon Interval The period of time how long a beacon is broadcasted.
Data Rate
The "Data Rate" is the data packets limitation this wireless
router can transmit. The wireless router will use the highest
possible selected transmission rate to transmit the data
packets.
Preamble Type
It defines the length of CRC block in the frames during the
wireless communication. "Short Preamble" is suitable for
heavy traffic wireless network. "Long Preamble" provides
much communication reliability
Broadcast SSID
If you enable "Broadcast SSID", every wireless station
located within the coverage of this wireless router can
discover this wireless router easily. If you are building a
public wireless network, enabling this feature is
recommended. Disabling "Broadcast SSID" can provide
better security.
IAPP
To enables multiple AP to communicate and pass
information regarding the location of associated Stations.
802.11g
Protection
Some 802.11g wireless adapters support 802.11g
protection, which allows the adapters searches for 802.11g
singles only. Select the “Disabled” to disable supporting
802.11g protection or select “enable” to support this function.
RF Output
Power
Select the RF (Radio Frequency) power. The RF output
power has positive correlation with signal strength.
Turbo Mode
Some of our wireless adapters supports turbo mode, which
provides a better connection quality. Select “Always” to
support turbo mode or select “off” to turn it off . Select
“Auto” turns it on or off automatically.
Click the <Apply Changes> button at the bottom of the screen to save the above configurations.
You can now configure other advance sections or start using the router.