User Manual

17
Wireless
Wireless Access Point builds a wireless LAN and can let all PCs equipped with
IEEE802.11b/g wireless network adaptor connect to your Intranet. It supports
WEP encryption and MAC address filter to enhance the security of your wireless
network.
Basic Settings
You can set up the configuration of your Wireless and monitor the
Wireless Clients associate with your AP.
Configuration
Disable Wireless LAN
Interface
To Disable interface of Wireless LAN
Band
To select a band for this device to match
802.11b, 802.11g or both.
Mode
Configure this device as AP, WDS or both.
Network type
When you configure this device in AP mode,
this drop list allows users to change the
network type into ad-hoc mode.
SSID The name of the wireless network
Country Select the region you live.
Associated Clients Click "Show Active Clients" button, t
hen an
"Active Wireless Client Table" will pop up. You
can see the status of all active wireless
stations that are connecting to the access
point.
Enable Universal
Repeater Mode
Mark this checkbox to enable Universal
Repeater Mode which acts this device
as an
AP and client simultaneously.
SSID of Extended
Interface
While you enable the Universal Repeater
Mode, you have to specify an SSID for the
extended interface.