User Manual

16
Refresh Refresh the "Active Wireless Client Table".
Close Close the "Active Wireless Client Table".
WDS Settings
This is the window that pops up after clicking the “Show WDS Setting”
button.
Wireless Distribution System allows this AP to communicate with other APs
wirelessly. To make it work, you must ensure that these APs are in the same
Channel and add these APs MAC Address and Comment values into the WDS
list. Don’t Forget to Enable the WDS by click the check box of “Enable WDS”
and press “Apply Changes” button to save.
To Delete the AP on the list, Click the check box in the select item and click the
“Delete Selected”. If you want to delete all APs on the list, click “Delete All” to
remove all of them.