User Manual

11
LAN Interface Setup
This page allows users to configure the LAN network settings.
Configuration
IP address The IP of your AP LAN port (Default 192.168.1.1)
Subnet Mask Subnet Mask of you LAN (Default 255.255.255.0)
Default Gateway The default gateway of this AP.
DHCP
Server
Select “Enable” to enable the DHCP server.
DHCP Client
Range
Specify the DHCP Client IP address range. You can also click
the “Show Client” button to list those connected DHCP clients.
DNS Server The DNS (domain name server) of this AP.
Domain Name The name that the AP is going to be recognized in LAN.
802.1d Spanning
tree
To preve
nt from network loops and preserve the quality of
bridged network
Clone MAC
Address
MAC cloning feature allows the MAC address reported by WAN
side network interface card to be set to the MAC address
already registered with the ISP eliminating the need to
register the new MAC address with the ISP. This feature does
not change the actual MAC address on the NIC, but instead
changes the MAC address reported by this device to client
requests. To Change the MAC address, enter it in the text box.