User's Manual

Wireless 11n 1T2R PCI-E Card
- 7 -
Chapter 1 Introduction
Thank you for purchasing this product. Read this chapter to know about your IEEE 802.11n wireless
1T2R PCI-E Adapter.
1.1 Overview of the product
Comply with 802.11n Standards
The IEEE 802.11n Wireless PCI-E adapter provides users to launch IEEE 802.11n wireless network
at 300 Mbps in the 2.4GHz band. It can also interoperate with all 11Mbps wireless (802.11b)
products and all 54 Mbps wireless (802.11g) products.
Reliable Coverage and Connection
The PCI-E Card adopts MIMO has two external detachable omni directional antennas providing
even better wireless performance, transmission rates, stability and coverage. You can configure this
adapter with ad-hoc mode to connect to other 2.4 GHz wireless computers, or with infrastructure
mode to connect to a wireless AP or wireless router for accessing to Internet.
Easy Installation, enhanced Wireless Security
As for installation, this wireless PCI-E adapter provides you the flexibility to install your PC in the
most convenient location available, without the cost of running network cables. So you can easily
connect your PC to your Wireless Access Point and enjoy the pleasure of Wi-Fi. Also, this product
supports WPA / WPA2 encryptions and mechanisms, allowing users to quickly and easily configure
wireless security.
1.2 Features
¾ High Speed transfer data rate up to 300 Mbps
¾ Support QoS Enhancement ( WMM, WMM-PS Client mode)
¾ Supports wireless data encryption with 64/128-bit WPA,WPA2
¾ Support frame aggregation, Power saving mechanism, channel management and co-existence
¾ Transmit Opportunity (TXOP) Short Inter-Frame Space (SIFS) bursting for higher multimedia
bandwidth
¾ Supports auto-installation and diagnostic utilities
¾ Two 802.11n/b/g wireless SMA antenna (Standard 1.8dB)
¾ Supports driver for Windows 2000, XP 86, XP 64, Vista 86, Vista 64, Linux