User Manual

Wireless 11n 1T2R PCI Card
RX OK
Successfully received frames numbers.
Rx Packet Count
The packets of receiving frames
RX Retry
Frames numbers re-receiving
RX ICV Error
with error. Integrity Check Value receiving
Reset Counter
Reset counters to zero.
4.2.8 Wi-Fi Protect Setup
tected Setup (Wi-Fi Simple Configuration) is to simplify the security
e wireless router and wireless card on the
ated from system
. PIN method
Input Config (PIN)”, and then come to the following figure.
The primary goal of Wi-Fi Pro
setup and management of Wi-Fi networks. This adapter supports the configuration setup using PIN
configuration method or PBC configuration method. If the wireless card supports Wi-Fi Protected
Setup (WPS), you can establish a wireless connection between wireless card and router using
either Push Button Configuration (PBC) method or PIN method.
Here we will introduce two ways to configure the QSS
(QSS is known as rapid security settings, by pressing th
QSS button to automatically set up WPA2 secure connection level without the router or network
adapter management software to conduct the cumbersome interface settings, greatly simplifying
the operation of the wireless security settings.)
Pin Code: 8-digit numbers. It is randomly gener
1
Click the button “Pin
lick the button “Yes”, you can select one of the AP. C
- 39 -