User's Manual

Wireless 11n 2T2R Router
36
If you are under the Wireless Client mode, the interface is different.
Click Wireless > WPS in the menu links to display the screen as shown below.
In this page you can connect your device to other networks by using PIN or PBC methods
.
Items Information
Disable WPS
Mark to disable the WPS, and clear to enable.
Self-PIN Number
If you use this device as a client, you can use this code
when trying to connect this device to other AP by using
the PIN method.
PIN Configuration
After the AP or router you share has fill in your self-pin
number and click the button in this GUI page
at this moment you can click the button in 2
minutes to establish the connection.
Push Button Configuration
You can simply click the button (or the WPS
button) together with the AP or router you want share in 2
minutes for connection.
3.5 TCP/IP Settings
3.5.1 LAN Interface Setup
To set up the configuration of LAN interface, private IP of your router LAN port and subnet mask
for your LAN segment.