User Manual
Table Of Contents
- Unpacking Information
- Chapter 1 Introduction to Wireless Access Point
- Chapter 2 Installing and Using Wireless Access Point
- Chapter 3 Management
- Appendix A: Product Specifications
Wireless 11n Access Point
29
Items Information
IP Address
The IP of your AP LAN port (default 192.168.0.51).
Subnet Mask
Subnet Mask of you LAN (default 255.255.255.0).
All devices on the network must have the same
subnet mask to communicate on the network.
Default Gateway
Enter the IP Address of the AP in your network.
DHCP
DHCP stands for Dynamic Host Configuration
Protocol. It is a protocol for assigning dynamic IP
addresses “automatically”. In this device, manual
setting up your client IP is necessary when you
want to use the AP as your client’s default gateway.
Please click on the Apply Changes button or the Reset button
at the bottom to save/reset the configurations.
3.5 Statistics
This page allows users to get information of data transferring condition, and monitor the status
and performance of this AP including receiving and sending packets. To see the latest report, click
button.