User Manual

Wireless 11n 1T1R Router
27
Items Information
Disable WPS
Mark to disable the WPS, and clear to enable.
Self-PIN Number
If you use this device as a client, you can use this code
when trying to connect this device to other AP by using
the PIN method.
PIN Configuration
After the AP or router you share has fill in your self-pin
number and click the
button in this GUI page
at this moment you can click the
button in 2
minutes to establish the connection.
Push Button Configuration
You can simply click the
button (or the WPS
button) together with the AP or router you want share in 2
minutes for connection.
3.5 TCP/IP Settings
3.5.1 LAN Interface Setup
To set up the configuration of LAN interface, private IP of your router LAN port and subnet mask
for your LAN segment.
Items Information
IP Address
The IP of your Router LAN port (default 192.168.100.1).
Subnet Mask
Subnet Mask of you LAN (default 255.255.255.0). All devices on the
network must have the same subnet mask to communicate on the
network.
Default Gateway
Enter the “IP Address” of the router in your network.