User Manual
Table Of Contents
- Unpacking Information
- Chapter 1 Introduction to the Wireless Router
- Chapter 2 Installation and Basic Configuration
- Chapter 3 Web-Based Management
- Appendix A: Product Specifications
- Appendix B: Glossary
Wireless 11n 1T1R Router
23
WPA2 Cipher Suite: the defaulting setting is AES
Pre-Shared Key
Format
To decide the format, select “Passphrase” or “Hex” in the drop list.
Pre-Shared Key
Enter the “Pre-shared Key” according to the pre-shared key format
you select. This is the shared secret between AP and STA. This field
must be filled with character longer than 8 and less than 64 lengths.
Show Password
Select to show the password or not.
* Please click on the Apply Changes button or the Reset button to save/reset the configurations.
4. Security Mode – WPA2-Mixed
Items Information
Select SSID
Please choose a SSID you have set for this router by clicking
“Wireless > Basic Settings” from the drop-down list. The SSID
will be show
n on the wireless network for your recognition.
Encryption
Select a security encryption mode for this router.
WPA / WPA2 Cipher Suite
The Cipher Suite is mixed (TKIP and AES).
Pre-Shared Key Format
To decide the format, select “Passphrase” or “Hex” in the drop
list.
Pre-Shared Key
Enter the “Pre-shared Key” according to the pre-shared key
format you select. This field must be filled with character longer
than 8 and less than 64 lengths.
Show Password
Select to show the password or not.
* Please click on the Apply Changes button or the Reset button to save/reset the configurations.










