User Manual

Wireless 11n 2T2R Router
31
3.5.7 WPS Settings
The primary goal of Wi-Fi Protected Setup (Wi-Fi Simple Configuration) is to simplify the security
setup and management of Wi-Fi networks. This Router supports the configuration setup using PIN
configuration method or PBC configuration method through an internal or external Registrar.
Items Information
WPS Status
You cannot manually select the items here. The WPS Status will
change from “UnConfigured” to “Configured” after you enable WPS
function and setup a wireless security key for this device.
Self-PIN
Number
If you use this device as a client, you can use this code when trying
to connect this device to other AP by using the PIN method.
Push Button
Configuratio
n
Push Button Communication (PBC) method use a simple action of
pushing a button on both the AP and the new STA to reach the
function of easy setup WPS connection. You can simply click the
button in this GUI page. After click on the button,
please run the client’s WPS and push the PBC button within 2
minutes.
Client PIN
Number
Personal Identification Number (PIN) method. Users have to fill in
the PIN code of enrollee device and click on the
button to make communication with other AP. After click on the
button, please run the client’s WPS and push the PIN button within
2 minutes.
Please click on the Apply Changes button or the Reset button at the bottom to save/reset the configurations.