User Manual

Wireless 11n 2T2R Router
24
regarding the location of associated Stations.
Protection
Some 802.11g wireless adapters support 802.11g protections,
which allows the adapter search for 802.11b/g singles only. Select
“Enabled” to support protection or select “Disabled” to disable this
function.
Aggregation
To aggregate lots of packets into a big one before transmitting
packets. This can reduce control packet overhead.
Short GI
Indicates that the 802.11g network is using a short slot time
because there are no legacy (802.11b) stations present
RF Output Power
Select the signal strength for the wireless network.
* Please click on the Apply Changes button or the Reset button at the bottom to save/reset the configurations.
3.5.3 Security
The Security function protects your wireless network from invasion. We provide WEP and WPA
encryption to secure your wireless network. Please select Disable, WEP, WPA, WPA2, and
WPA-Mixed in the drop list. If you select none, any data will be transmitted without encryption and
any station can access the router.
Items Information
Select SSID
Please choose a SSID you have set for this router in the Wireless
> Basic Settings from the drop-down list. The SSID will be shown
on the wireless network for recognizing.
Encryption
There are 5 modes for you to select: Disable, WEP, WPA, WPA2,
and WPA-Mixed. Please refer to the following description.
802.1x Authentication
Users that do not use this function or connecting to an
open-wireless network please skip this part. Please configure the
settings in accordance with the Certificated Server.