User Manual
Table Of Contents
- Unpacking Information
- Chapter 1 Introduction to Wireless Router
- Chapter 2 Installing and Using Wireless Router
- Chapter 3 Management
- Appendix A: Product Specifications
- Appendix B: Glossary
Wireless 11n 2T2R Router
23
3.5.2 Advanced Settings
You can set advanced wireless LAN parameters of this router. We recommend not changing these
parameters unless you know what changes will be on this router.
Items Information
Fragment
Threshold
This value should remain at its default setting of 2346. If you
experience a high packet error rate, you may slightly increase your
fragmentation threshold within the value range of 0 to 2346. Setting
the fragmentation threshold too low may result in poor performance.
RTS Threshold
Request To Send threshold. This value should remain at its default
setting of 2347. If you encounter inconsistent data flow, only minor
modifications to the value range between 1 and 2347 are
recommended.
Beacon Interval
Beacons are packets sent by an access point to synchronize a
wireless network. Specify a beacon interval value. Default (100ms)
is recommended.
Preamble Type
The length of CRC blocks in the frames during the wireless
communication.
IAPP
To enables multiple AP to communicate and pass information