User Manual
Table Of Contents
- Chapter 1 Introduction
- Chapter 2 Installation Guide for Windows
- Chapter 3 Management Guide
- Chapter 4 Introduction for Vista user
- Appendix A: Specifications
- Appendix B: Glossary
Wireless 11n USB Adapter
SSID: AP name of user type.
Security Setting: Authentication mode and encryption algorithm used within the AP. System
default is no authentication and encryption.
Cancel: Cancel the above changes.
OK: Apply the above changes.
A. Network Authentication
Select the Security tab in the screen above. To define the security mode, select the desired security
mode as follows. There are 4 types supported: Open System, Shared Key, WPA-PSK, WPA2-PSK.
Please select a type from the drop down list.
B. Data Encryption:
Data encryption
There are 4 types supported: Disabled, WEP, TKIP and AES. The
available encryption selection will differ from the authentication type you
have chosen, the result is shown below:
Authentication
A
vailable Encryption Selection
Open System Disabled, WEP
Shared Key WEP
WPA-PSK, WPA2-PSK TKIP, AES
Note: Select different Security Options, the configurations are different; you can select the
appropriate security option and configure the exact key as your need.
- 33 -