Installation Instructions

Bluetooth
V5.0
Connectors
USB (with OTG support), Power Jack, microSD
Electrical Specifications
Input Voltage
7V-17V
Input current (full
operation)
12V / 2A
Max Power Consumption
24W
Signals Input – High
Voltage
(Positive)
+17V
Signals Input – Low
Voltage
(Negative)
0v
Physical Dimensions
Length x Width x Height
126mm x 71mm x 65mm
Colour
Black
Case Material
Polycarbonate (PC)
Power Cable Length
3 meters
Power Cable Thickness
4.5mm
OPERATING REQUIREMENTS AND CONDITIONS
The design of Netradyne D-210 complies with U.S. Federal Communications
Commission (FCC) guidelines respecting safety levels of radio frequency (RF) exposure
for Mobile devices.
RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with a
minimum distance of 20 centimetres between the radiator and your body.
FCC PART 15 STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
This equipment has been verified to comply with the limits for a class B computing device,
pursuant to FCC Rules. In order to maintain compliance with FCC regulations, shielded cables
must be used with this equipment. Operation with non-approved equipment or unshielded cables
is likely to result in interference to radio and TV reception. The user is cautioned that changes and
modifications made to the equipment without the approval of manufacturer could void the user’s
authority to operate this equipment.