Reference Guide

Easy Setup 7-3

Quick Easy Setup connection path

Note: ADSL routers are often pre-conﬁgured for you by your service provider. If this is the case, you can skip

this section. If your service provider has not pre-conﬁgured your router, follow these instructions.

This section may be all you need to do to conﬁgure your Netopia R6000 Series ADSL Router to connect to the

Internet. Most ISPs will supply you with several parameter values for you to enter in the router. The ISP will

provide the values shown below:

(If you want to record these values, you can print this page and use the spaces above.)

Parameter: Your value:

First screen: ADSL Line Conﬁguration

Data Link Encapsulation RFC1483 (default) or

PPP

Second screen: Connection Proﬁle 1: Easy Setup Proﬁle

Address Translation Enabled Yes (default) or No

IP Addressing Numbered (default) or

Unnumbered

Local WAN IP Address (Numbered)

or Remote IP Address

(Unnumbered)

n/a

Local WAN IP Mask (Numbered) or

Remote IP Mask (Unnumbered)

n/a

PPP Authentication (PPP only) None (default), PAP,

CHAP

User Name (PAP)

or Host Name (CHAP)

n/a

Password (PAP)

or Secret (CHAP)

n/a

Third screen: IP Easy Setup

Domain Name n/a

Primary Domain Name Server n/a

Secondary Domain Name Server n/a

Default IP Gateway n/a