Reference Guide

16-44 User’s Reference Guide
The filter set you select will be applied to the Ethernet hub interface.
Caution! You should not attach the default filter sets Basic Firewall or NetBIOS Filter to the Ethernet LAN or its
subnets. This may result in a loss of connectivity to the network or subnet. Instead, create a new filter set in
accordance with the standard filtering rules described in this chapter.
To remove the filter set from the Ethernet hub interface, select Remove Filter Set and press Return. The filter
set will be disconnected from the LAN interface.
Note: Removing the filter set from the LAN does not delete the filter set. It is still available to be reassociated
with the same or another interface, or modified further.
IP Setup
Ethernet IP Address: 192.168.1.1
Ethernet Subnet Mask: 255.255.255.0
Define Additional Subnets...
Default IP Gateway: 0.0.0.0
Backup IP Gateway: 0.0.0.0
Primary Domain Name Server: 0.0.0.0
Secondary Domain +-----------------------------------+
Domain Name: +-----------------------------------+
| Basic Firewall |
Receive RIP... | NetBIOS Filter |
Transmit RIP... | My LAN Filter Set 1 |
| My LAN Filter Set 2 |
LAN (EN Hub) Filt| |
Remove Filter Set| |
| |
Static Routes... | |ng...
Network Address Tran+-----------------------------------+