User manual

10 Set Up and Share the Connection
In most cases, this SmartStart configuration is all that you need to get your router up and running and connected to the Internet. However,
you may want to take advantage of additional features or special configuration options available through the console-based configuration
interface. For detailed instructions, see the on-line User’s Reference Guide on your Netopia CD.
Connection Profile Test screen. SmartStart tests your connection
profile by attempting to connect to your ISP.
To test the connection profile with your ISP, click Next.
While the test is running, SmartStart reports its progress in a brief
succession of dialog boxes as described below.
Available Line Test Progress screen. SmartStart tests to see if the
router can place calls on your telephone line. While it is testing the
connection, a dialog box is displayed and the LEDs flash.
Connection Test Progress screen. SmartStart displays a dialog box
showing you that your connection profile is being tested. If this test
fails, check the physical connections between the computer, the router,
and the wall jack or jacks. Check for errors in any manual entries you
made during the configuration process.
Final screen. When the connection tests successfully, SmartStart
displays a screen telling you that your configuration is now complete.