Netopia™ 3346-ENT ADSL Router Getting Started Guide MAKING BROADBAND WORK™
Copyright ©2003 Netopia, Inc., v.023003 All rights reserved. Printed in the U.S.A. This manual and any associated artwork, software, and product designs are copyrighted with all rights reserved. Under the copyright laws such materials may not be copied, in whole or part, without the prior written consent of Netopia, Inc. Under the law, copying includes translation to another language or format. Netopia and Cayman are registered trademarks, and “Making Broadband Work” is a trademark of Netopia, Inc.
Contents Contents 3 Chapter 1 — Introduction..........................................................1-5 Overview ....................................................................... 1-5 Features and Capabilities ............................................... 1-5 How to Use this Guide.................................................... 1-6 Chapter 2 — Making the Physical Connections..........................2-1 Find a Location ..............................................................
Getting Started Guide 3. IP Easy Setup .................................................. 6-6 4. Easy Setup Security Configuration ..................... 6-8 Appendix A — Technical Specifications and Safety Information ..A-1 Description.................................................................... A-1 Power requirements ............................................. A-1 Environment ........................................................ A-1 Software and protocols....................................
Introduction 1-5 Chapter 1 Introduction Overview The Netopia 3346-ENT ADSL Router is a full-featured, stand-alone DSL router for connecting diverse local area networks (LANs) to the Internet and other remote networks. The Netopia 3346-ENT ADSL Router uses a high performance ADSL line to provide your whole network with a high-speed connection to the outside world.
1-6 Getting Started Guide • NAT/NAPT, Multi-NAT, and DHCP (client, server, and relay) for security and convenience • DNS proxy • IP Multicast Forwarding, IGMP V1, V2 • RIP1 and RIP2, static routes • IP QoS: TOS bit prioritization • VPN Pass-through for PPTP and IPSec • Built-in VPN gateway features offer support for up to 15 PPTP or IPSec VPN tunnels • IPSec implementation supports DES or 3DES encryption, MD5 or SHA1 encapsulation, and manual or IKE keying • Built-in firewall protects LAN r
Making the Physical Connections 2-1 Chapter 2 Making the Physical Connections This section tells you how to make the physical connections to your Netopia 3346-ENT ADSL Router.
2-2 Getting Started Guide You will need: • A Windows–based PC or a Macintosh computer with Ethernet connectivity for configuring the Netopia 3346-ENT. This may be built-in Ethernet or an add-on card, with TCP/IP installed and configured. See “Sharing the Connection” on page 4-1. • A DSL wall outlet wired for a connection to a telephone carrier who supports Asymmetric Digital Subscriber Line (ADSL) connections.
Making the Physical Connections 2-3 Identify the Connectors and Attach the Cables Identify the connectors and switches on the back panel and attach the necessary Netopia Router cables. Connect your computer, DSL line, and power source as shown. 10/100BT LAN DSL 2 4 3 LAN 2 1 DC Power Power Power Switch Off / On DSL 1 3 1. For a direct computer to router Ethernet connection, use the standard Ethernet cable included with your router. 2.
2-4 Getting Started Guide Netopia 3346-ENT back panel 4 3 LAN 2 1 Power Off / On DSL DSL port Power switch Ethernet ports Power port . Port DSL port Ethernet ports Power port Power switch Description An RJ-48 jack labeled DSL for your ADSL connection. Four RJ-45 10/100Base-T Ethernet jacks. You can use one of these to configure the Netopia 3346-ENT.
Making the Physical Connections 2-5 Netopia 3346-ENT ADSL Router Status Lights The figure below represents the Netopia 3346-ENT status light (LED) panel.
2-6 Getting Started Guide
Connecting to Your Local Area Network 3-1 Chapter 3 Connecting to Your Local Area Network This chapter describes how to physically connect the Netopia 3346-ENT to your local area network (LAN). Before you proceed, make sure the Netopia 3346-ENT is properly configured. You can customize the router’s configuration for your particular LAN requirements using console-based management (see “Telnet-Based Management” on page 5-1).
3-2 Getting Started Guide Ethernet: Ethernet hardware and software drivers enable your PC or Macintosh computer to communicate on the LAN. Once the Netopia 3346-ENT is properly configured and connected to your LAN, PC and Macintosh computers that have their required components in place will be able to connect to the Internet or other remote IP networks. Connecting to an Ethernet Network You can connect a standard 10/100Base-T Ethernet network to the Netopia 3346-ENT using any of its Ethernet ports.
Sharing the Connection 4-1 Chapter 4 Sharing the Connection Once you have set up your physical local area network, you will need to configure the TCP/IP stack on each client workstation connected to your Netopia 3346-ENT. This chapter describes how to configure TCP/IP for both Windows-based and Macintosh computers.
4-2 Getting Started Guide 1. Go to the Start Menu/Settings/Control Panels and double click the Network icon. From the Network components list, select the Configuration tab. 2. Select TCP/IP-->Your Network Card. Then select Properties. In the TCP/IP Properties screen, select the IP Address tab. Click “Obtain an IP Address automatically”. 3. Click on the DNS Configuration tab. Click Disable DNS. DNS will be assigned by the router with DHCP. 4. Click OK in this window and the next window.
Sharing the Connection 4-3 Static configuration (optional) If you are manually configuring for a fixed or static IP address, perform the following: 1. Go to Start Menu/Settings/Control Panels and double click the Network icon. From the Network components list, select the Configuration tab. 2. Select TCP/IP-->Your Network Card. Then select Properties. In the TCP/IP Properties screen, select the IP Address tab. Click “Specify an IP Address.” Enter the following: IP Address: 192.168.1.2 Subnet Mask: 255.
4-4 Getting Started Guide 3. Click on the Gateway tab (shown below). Under “New gateway,” enter 192.168.1.1. Click Add. This is the Netopia 3346-ENT’s pre-assigned IP address. Click on the DNS Configuration tab. Click Enable DNS. Enter the following information: Host: Type the name you want to give to this computer. Domain: Type your domain name. If you don't have a domain name, type your ISP's domain name; for example, netopia.com.
Sharing the Connection 4-5 Dynamic configuration (recommended) The Dynamic Host Configuration Protocol (DHCP), which enables dynamic addressing, is enabled by default in the router. To configure your Macintosh computer for dynamic addressing do the following: 1. Go to the Apple menu. Select Control Panels and then TCP/IP. 2. With the TCP/IP window open, go to the Edit menu and select User Mode. Choose Basic and click OK. 3.
4-6 Getting Started Guide 3. In the TCP/IP window or in the MacTCP/More window, select or type information into the fields as shown in the following table. Option: Connect via: Configure: IP Address: Subnet mask: Router or Gateway address: Name server address: Implicit Search Path: Starting domain name: Select/Type: Ethernet Manually 192.168.1.2 255.255.255.0 192.168.1.
Telnet-Based Management 5-1 Chapter 5 Telnet-Based Management Telnet-based management is a menu-driven interface for the capabilities built into the Netopia 3346-ENT. Telnet-based management provides access to a wide variety of features that the router supports. You can customize these features for your individual setup. This chapter describes how to access the Telnet-based management screens.
5-2 Getting Started Guide • The System Configuration menus display and permit changing: • IP Setup • Filter Sets • IP Address Serving • Network Address Translation (NAT) • Date and Time • SNMP (Simple Network Management Protocol) • Security • Upgrade Feature Set • Change Device to a Bridge • Logging • The Utilities & Diagnostics menus provide a selection of seven tools for monitoring and diagnosing the router's behavior, as well as for updating the firmware and rebooting the system.
Telnet-Based Management 5-3 • If you connect a PC with Microsoft Windows, you can use a Windows Telnet application or simply run Telnet from the Start menu. • If you connect a Macintosh computer, you can use the NCSA Telnet program supplied on the Netopia 3346-ENT CD. You install NCSA Telnet by simply dragging the application from the CD to your hard disk.
5-4 Getting Started Guide
Easy Setup 6-1 Chapter 6 Easy Setup This chapter describes how to use the Easy Setup Telnet screens on your Netopia 3346-ENT. After completing the Easy Setup Telnet screens, your router will be ready to connect to the Internet or another remote site.
6-2 Getting Started Guide Quick Easy Setup Connection Path This section may be all you need to do to configure your Netopia 3346-ENT ADSL Router. Your service provider will supply you with several parameter values.
Easy Setup 6-3 The following steps will get you up and running quickly: 1. Open a Telnet session to 192.168.1.1 to bring up the Main Menu. If you don't know how to do this, see “Connecting through a Telnet Session” on page 5-2. The Main Menu appears. Netopia 3346-ENT Easy Setup... WAN Configuration... System Configuration... Utilities & Diagnostics... Statistics & Logs... Quick Menus... Quick View...
6-4 Getting Started Guide 1. DSL Line Configuration ADSL Line Configuration Trellis Coding Enabled: On Fast Retrain Enabled: On Wiring Type... Data Link Encapsulation... RFC1483 Mode... PPP over Ethernet (PPPoE): Tip/Ring (Inner Pair) RFC1483 Bridged 1483 Off Data Circuit VPI (0-255): Data Circuit VCI (32-65535): 8 35 PREVIOUS SCREEN NEXT SCREEN 1. Select Trellis Coding Enabled. Toggle it to On (the default) or Off. Unless otherwise specified by your provider, you can accept this default. 2.
Easy Setup 6-5 2. Easy Setup Profile The Easy Setup Profile screen is where you configure the parameters that control the Netopia 3346-ENT’s connection to a specific remote destination, usually your ISP or a corporate site. On a Netopia 3346-ENT you can add up to 15 more connection profiles, for a total of 16, although you can only use one at a time, unless you are using Virtual Private Networks (VPNs).
6-6 Getting Started Guide 3. If you selected PPP data link encapsulation in the DSL Line Configuration screen, a PPP Authentication menu item appears. The authentication protocol and user name/password combinations you enter must be assigned or agreed to in advance between you and your ISP. Select PPP Authentication and press Return.
Easy Setup 6-7 Because this is a private network address, it should never be directly connected to the Internet. Using NAT for all your connection profiles will ensure this restriction. See the Firmware User’s Guide chapter on “Multiple Network Address Translation (MultiNAT)” for more information. 2. Select Ethernet Subnet Mask and enter the subnet mask your ISP has given you only if you are not using NAT.
6-8 Getting Started Guide 4. Easy Setup Security Configuration The Easy Setup Security Configuration screen lets you password-protect your Netopia 3346-ENT. Input your Write Access Name and Write Access Password with names or numbers totaling up to eleven digits. If you password protect the Telnet screens, you will be prompted to enter the name and password you have specified every time you log in to the Telnet screens. Do not forget your name and password.
Technical Specifications and Safety Information A-1 Appendix A Technical Specifications and Safety Information Description Dimensions: 13.5 cm (w) x 13.5 cm (d) x 3.5 cm (h) 5.25” (w) x 5.25” (d) x 1.5” (h) Communications interfaces: The Netopia 3346-ENT Router has an RJ-45 jack for WAN line connections and a 4–port 10/100Base-T Ethernet switch for your LAN connections. Power requirements • 12 VDC input • 1.
A-2 Getting Started Guide • United States – UL: 1950 Third Edition • Canada – CSA: CAN/CSA-C22.2 No. 950-95 EMC: • United States – FCC Part 15 Class B • Canada – ICES-003 Telecom: • United States – FCC Part 68 • Canada – CS-03 International Safety Approvals: • Low Voltage (European directive) 73/23 • EN60950 (Europe) EMI Compatibility: • 89/336/EEC (European directive) • EN55022:1994 • EN300 386 V1.2.1 CISPR22 Class B Regulatory notices European Community.
Technical Specifications and Safety Information A-3 United States. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
A-4 Getting Started Guide Caution Users should not attempt to make such connections themselves, but should contact the appropriate electric inspection authority, or electrician, as appropriate. The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication of the maximum number of terminals allowed to be connected to a telephone interface.
Technical Specifications and Safety Information A-5 b) List all applicable certification jack Universal Service Order Codes (“USOC”) for the equipment: RJ11. c) A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant.
A-6 Getting Started Guide
