Router User Guide

3-28 Firmware User Guide
The IP Profile Parameters screen, found under the WAN Configuration menu, Add/Change Connection Profile
screen, appears as shown.
If you select NAT Options, in either case, the NAT Options screen appears.
If you toggle IP Passthrough Enabled to Ye s , additional field(s) appear.
IP Profile Parameters
Address Translation Enabled: Yes
IP Addressing... Numbered
NAT Map List... Easy-PAT List
NAT Server List... Easy-Servers
NAT Options...
Stateful Inspection Enabled: No
Local WAN IP Address: 0.0.0.0
Local WAN IP Mask: 0.0.0.0
Filter Set...
Remove Filter Set
RIP Profile Options...
Toggle to Yes if this is a single IP address ISP account.
Configure IP requirements for a remote network connection here.
NAT Options
IP Passthrough Enabled: No
Toggle ON to allow local WAN IP address to be used on LAN in addition to NAT.