Router User Guide

IP Setup 6-23
From the NetBIOS Type pop-up menu, select the type of NetBIOS used on your network.
To ser ve DHCP clients with the NetBIOS scope, select Serve NetBIOS Scope and toggle it to Yes.
Select NetBIOS Scope and enter the scope.
To ser ve DHCP clients with the IP address of a NetBIOS name server, select Serve NetBIOS Name Server
and toggle it to Yes .
Select NetBIOS Name Server IP Addr and enter the IP address for the NetBIOS name server.
You are now finished setting up DHCP NetBIOS Options. To return to the IP Address Serving screen, press
Escape.
To enable BootP’s address serving capability, select Serve BOOTP Clients and toggle to Ye s .
Note: Addresses assigned through BootP are permanently allocated from the IP Address Serving pool until
you release them. To release these addresses, navigate back to the Main Menu, then Statistics & Logs,
Served IP Addresses, and Lease Management.
DHCP NetBIOS Options
+--------+
Serve NetBIOS Type: +--------+
NetBIOS Type... | Type B |
| Type P |
Serve NetBIOS Scope: | Type M |
NetBIOS Scope: | Type H |
+--------+
Serve NetBIOS Name Server: No
NetBIOS Name Server IP Addr: 0.0.0.0
Local network Broadcast nodes
Main
Menu
Statistics
Served IP
& Logs
Addresses
Lease Management