Network Router User's Manual

2-26 Firmware User Guide
Note: If Stateful Inspection is enabled on a base connection profile (for example, for PPP, RFC1483
bridged/routed, or PPPoE), Enable default mapping to router must be yes to allow inbound VPN terminations.
(for example. for PPTP/ATMP client access to the router)
• Deny Fragmented Packets: Toggling this option to Yes causes the router to discard fragmented packets on
this interface.
• You can apply these parameters to your Exposed Address lists by selecting your Exposed Address List
from the pop-up menu,
Stateful Inspection Parameters
+Exposed Address List N+
+----------------------+
Max. TCP Sequ| my_xposed_list | 0
| <<None>> |
Enable defaul| | No
| |
Deny Fragment| | No
| |
Exposed Addre| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
+----------------------+
Up/Down Arrows to select, then Return/Enter; ESC to cancel.