User's Manual

Yellow
ON
Working Status
Red Red
Green
Blue
ONONON
ON
ON
ON
ON
ON
ON
FLASH
FLASH
OFFOFFOFFOFF
OFF
OFF
OFF
OFF OFFOFF
OFFOFF
OFF
(Off under battery in full charge)
2.
1.
*
3
4
1 2
-4-
Installations
Please enter into menu settings to set up the date &time and other
settings before installations.
*
* All the data are factory defaults if not set up.
Setting method please refer to setting before Use.
*One parent unit can pair more baby units,up to 4pcs.
Put the baby unit in the best place you can here and see. Connect it
to adapter and slide up power switch to turn it on and the red LED with
light up. The blue LED on parent unit will flash.
*Night vision IR LED will light up automatically according to darkness.
Slide up parent unit power switch to turn on and you'll hear the sound
of drip-drip-drip which means paring with baby unit is not successful.
Press on <Enter> to enter into menu and use <Up > and <Down >
to enter into pairing function. Select a baby unit to pare and after paring
is successful, the selected baby unit number will display on the lower
right corner and the sound will disappear.
Parent Unit LED Indicators
Connect to DC
Power On
Successful Paring
Low Volume
High Volume