User's Manual

WF2411
26
Press Apply to complete this operation and close the window.
3.2. Checking Connection with the Router
After configuring the TCP/IP protocol, use the ping command to verify if the computer
cancommunicate with the Router. To execute the ping command, open the DOS window
andPing the IP address of the 150Mbps Wireless-N AP/ Repeater / Router client at the DOS
prompt:
For Windows 98/Me: Start -> Run. Type command and click OK.
For Windows 2000/XP: Start -> Run. Type cmd and click OK.
For Windows Vista/7:Start Type cmd at the start search bar and press the Enter.
For MAC OSThesystem will complete this operation automatically.
At the DOS prompt, type the following command:
If the Command window returns something similar to the following:
Then the connection between the router and your computer has been successfully established.
If the computer fails to connect to the router, the Command window will return the following: