WF-2409 300Mbps High Performance Wireless-N Broadband Router Quick Installation Guide V1.
WF-2409 Quick Installation Guide Certification FCC CE FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
WF-2409 Quick Installation Guide Package Contents The following items should be found in your package: 300Mbps High Performance Wireless-N Broadband Router Power Adapter Quick Installation Guide 3 Antennas CD-ROM Ethernet Cable Make sure that the package contains above items. If any of the above items is missing or damaged, please contact the store you bought this product from.
WF-2409 Quick Installation Guide 1. Hardware Installation Procedure The procedures to install the WF-2409 please refer to Figure 1-1. Figure 1-1 Step 1 connecting your computer to the LAN port. Attach one end of the Ethernet cable with RJ-45 connector to your hub, switch or a computer’s Ethernet port, and the other end to one of the LAN ports of your WF-2409. Step 2 Connecting Cable/ADSL Modem to the WAN port.
WF-2409 Quick Installation Guide an IP address automatically from the Router by the steps below. 2.1. Configure computer (Windows 7) Please follow the steps below to setup your computer: 1. Go to Start Settings Control Panel 2. Click Network and Sharing Center Figure 2-1 3. Click Manage Network Connections Figure 2-2 4.
WF-2409 Quick Installation Guide Figure 2-3 5. Highlight Internet Protocol Version 4 (TCP/IP) and then press Properties button Figure 2-4 6.
WF-2409 Quick Installation Guide Figure 2-5 7.
WF-2409 Quick Installation Guide 2.2. LED Indicators Figure 2-7 LED Function PWR On WPS Flashing slowly SYS Flashing Normal WLAN Flashing Wireless data transmitting ON WAN connection normal WAN Flashing LAN ON Flashing Power on WPS is running Data transmitting Corresponding LAN port connection normal Corresponding LAN port data transmitting 2.3. Additional Settings for Wireless Client If you choose to access the router via a wireless client, also verify the following: 1.
WF-2409 Quick Installation Guide Encryption: Off Radio Band: 802.11B/G/N 2.4. Checking PC’s IP and Connection with the Router After configuring the TCP/IP protocol, use the ping command to verify if the computer can communicate with the Router. To execute the ping command, open the DOS window and ping the IP address of the WF-2409 at the DOS prompt: For Windows 98/Me: Start -> Run. Type command and click OK. For Windows 2000/XP: Start -> Run. Type cmd and click OK.
WF-2409 Quick Installation Guide Packets: Sent = 4, Received = 0, Lost = 4 (100% loss), Verify your computer's network settings are correct and check the cable connection between the router and the computer. In order to make the whole network operate successfully, it is necessary to configure the WF-2409 through your computer has a WEB browser installed. Please follow up the steps listed below. 2.5. Login 1. Startup Internet Explorer and enter http://192.168.1.1, then press Enter Figure 2-1 2.
WF-2409 Quick Installation Guide Figure 2-2 3. After successful login, you will be able to see the WF-2409’s web-based configuration utility refer to Figure 2- From now on the WF-2409 acts as a Web server sending HTML pages/forms at your request. You can click the menu options at the left to start the configuration task. In the home page of the WF-2409, the left navigation bar shows the main options to configure the system.
WF-2409 Quick Installation Guide quickly; including “DHCP”, ”PPPoE”, ”Static IP”, ”PPTP”, ”L2TP” and “Wireless Configuration”. This is the most convenient tool for you to configure router. 3.1.1. DHCP user (Cable Modem) Figure 3-1 After select this item, you will obtain an IP address from your ISP automatically, those ISP who supply Cable modem always use DHCP technology. 3.1.2.
WF-2409 Quick Installation Guide 3.1.3. Static User Figure 3-3 This item should only be used when users use a static IP address to access Internet, you should input your “WAN IP address”, ”subnet mask”,” default gateway” and “DNS server (domain name server) IP address” according to the information provided by your ISP. And every IP address should be input in appropriate IP field, a IP address only divided into four IP octets by sign”.” is acceptable.
WF-2409 Quick Installation Guide 3.1.4. Static IP + PPTP Client Figure 3-4 If your ISP provides you the Static PPTP service, please select this item. In the “Convenient configuration” You can input your PPTP Server, username and password to access the Internet.
WF-2409 Quick Installation Guide It is provided by your ISP 3.1.5. Static IP + L2TP Client Figure 3-5 If your ISP provides you the Static L2TP service, please select this item. In the “Convenient configuration” You can input your L2TP Server, username and password to access the Internet.
WF-2409 Quick Installation Guide User Name Iput User name your ISP provides Password It is provided by your ISP 3.1.6. Wireless Configuration You can choose “Enable” or “Disable” to enable or disable the wireless function. The default setting is ”enable”. If you chose the “Disable” status, the router will become a wired broadband router without wireless function, so be careful when you choose this status.
