User Manual

WF-2403 User Manual

4.3. Status

Please refer to chapter 3.2 .

4.4. WPS Settings

Please refer to chapter 3.4 .

4.5. Network

Please refer to chapter 3.5 .

4.6. DHCP

Note: When the device works under client mode, it acts like a wireless adapter, don‟t need to

change this option. Keep its status disable, so your computer could get IP address from other

broadband device.

4.7. System Tools

Please refer to chapter 3.13 .

4.8. About

Please refer to chapter 3.14 .

5. How to configure AP mode

5.1. Login web management page

Note: The DHCP server is disable under AP mode, so you need to configure a static IP

address for WF-2403, then you can login the web page of the device.

Connect your device following the network topology in figure 2-5, then configure your

computer follow procedures below.

1) Select “My Network Places” on the desktop, right click, then choose “Properties”.