User Manual

WF-2403 User Manual

please access this website http://www.netis-systems.com/

Figure 3-63

4. How to configure Client mode

4.1. Login web management page

Note: The DHCP server is disable under client mode, so you need to configure a static IP

address for WF-2403, then you can login the web page of the device.

Connect your device following the network topology in figure 2-4, then configure your

computer follow procedures below.

1) Select “My Network Places” on the desktop, right click, then choose “Properties”.

Figure 4-1

2) Select “Local Area connection”, right click, then choose “Properties”.