User Manual

WF-2403 User Manual
31
3.6.2.5. WPA/WPA2-PSK
This item mixed WPA-PSK and WPA2-PSK mode, which provides higher security level; you
can configure it according with WPA-PSK or WPA2-PSK.
Figure 3-36
3.6.3. Wireless MAC Filtering
Figure 3-37
 MAC Filter Status: the default is disable. You can filter wired users by enabling this
function; thus unauthorized users can not access the network.
 Description: describe MAC Filter list to tell from different MAC Filter lists.
 Rule: you can select permit or deny. The default is permit.
 MAC address: input the MAC address that you want to control. The default format is
**-**-**-**-**-**（e.g.: 00-22-33-da-cc-bb）.
Follow the following steps to set MAC filter:
1. Enable MAC Filter, then select save.
2. Add MAC address you want to control in the “MAC address” field (the format is