R netis Wireless High Power Outdoor AP Router Quick Installation Guide Model No.
netis Wireless High Power Outdoor AP Router Quick Installation Guide 1.Package Contents The following items should be found in your package: netis Wireless High Power Outdoor AP Router Quick Installation Guide Outdoor AP Router PoE Injector Power Adapter Quick Installation Guide Mounting Tie x2 Slip-proof Pad x2 Please make sure that the package contains above items, if any of the listed items are damaged or missing, please contact your distributor.
netis Wireless High Power Outdoor AP Router Quick Installation Guide For step A) LAN/WAN LAN/WAN Computer For step B) to E) 2.The connection will be similar to the figure below after the above steps are finished.
netis Wireless High Power Outdoor AP Router Quick Installation Guide ISP INDOOR WISP Mode Main Electrical Supply POWER Power Cable PoE Injector LAN/WAN TO Switch or PC Ethernet Cable When device works in AP/AP Router mode, 1. Connection step A) ~ C) is same as above D) Connect the Ethernet cable into LAN/WAN port of PoE injector and the other end to the Ethernet port of xDSL or Cable modem/router.
netis Wireless High Power Outdoor AP Router Quick Installation Guide 2.The connection will be similar to the figure below after the above steps are finished. Internet INDOOR AP/AP Router Main Electrical Supply POWER Power Cable PoE Injector LAN/WAN connect to xDSL or Cable modem/router Ethernet Cable 3.
netis Wireless High Power Outdoor AP Router Quick Installation Guide 3.2 Open your browser and type http://192.168.1.1 in the address field to visit router's web management page. 3.3 A dialog box will prompt as below, please enter User name and Password, both default values are guest and click OK. Note: The configuration includes “Internet settings” and “Wireless settings”, if you choose “AP”, please go to Wireless Settings directly. AP Router Mode: Select the correct Connection Type.
netis Wireless High Power Outdoor AP Router Quick Installation Guide WISP Mode : Select target network and Connection Type. 1. Click “AP Scan” button to select your target network and click “Connect” button. 2. Type in the wireless security info of the target network. 3. Select connection type.
4.Troubleshooting Q How do I restore my netis WF2322 to default settings? A With the router powered on, holding “Reset” button on the PoE injector for 8s~10s with a pin to restore it to factory defaults. Q What can I do if my Internet cannot be accessed? A 1) Check to verify the hardware connections are correct. Please refer to the “Hardware Connection” step. 2) Refer to 3.1) to set a Static IP address for your PC and connect the WF2322 to your PC. 3) Open a web browser and login to http://192.168.1.
