User's Manual
Step 1 connecting Cable/ADSL Modem to the WAN port.
Attach one end of an Ethernet cable to your modem’s Ethernet port, and the other end to one
of the WAN ports of your router.
Step 2 connecting the power adapter.
Attach one end of an Ethernet cable to the Internet access router LAN port, the other end to
the Internet port of power adapter. Then plug the Power Adapter into an AC outlet.
Step 3 connecting the 150Mpbs outdoor adapter.
Connect another Ethernet cable from your POE port of the power adapter to the LAN port of
150Mbps outdoor AP.
Step 4 Power on the following devices in this order:
Cable/ADSL modem, Router.
2. LED Indicators
Figure 2-1
LED
Function
ON Poweron
Off Poweroff
On Connectionnormal
Off Abnormal
Flashing Datatransmitting
On Powersupplynormal
POE
Off Abnormal
Flashing
4lightsignalstrengthabove75%
3lightsignalstrengthmedium
Lessthan2lightsignalstrengthis
weak.
Off Nosignal