User's Manual

If the Command window returns something similar to the following:

C:\Documents and Settings\admin>ping 192.168.1.1

Pinging 192.168.1.1 with 32 bytes of data:

Reply from 192.168.1.1: bytes=32 time=1ms TTL=64

Ping statistics for 192.168.1.1:

Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

Approximate round trip times in milli-seconds:

Minimum = 0ms, Maximum = 0ms, Average = 0ms

Then the connection between the router and your computer has been successfully established.

If the computer fails to connect to the router, the Command window will return the

following:

C:\Documents and Settings\admin>ping 192.168.1.1

Pinging 192.168.1.1 with 32 bytes of data:

Request timed out.

Ping statistics for 192.168.1.1:

Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),

Verify your computer's network settings are correct and check the cable connection between

the router and the computer.

In order to make the whole network operate successfully, it is necessary to configure the

150Mbps AP through your computer has a WEB browser installed. Please follow up the steps

listed below.

5. Login

Open a web browser (Safari, Internet Explorer, etc.) on the computer you have just connected to

the router, type http://192.168.1.1 in the address bar, and press enter