User's Manual

Figure 3-20
5. Press OK to close the Local Area Connection Properties window.
4. Checking Connection with the Adapter
After configuring the TCP/IP protocol, use the ping command to verify if the computer can
communicate with the Router. To execute the ping command, open the DOS window and Ping the
IP address of the 300Mbps Wireless-N Gigabit Router at the DOS prompt:
 For Windows 98/Me: Start → Run. Type command and click OK.
 For Windows 2000/XP: Start → Run. Type cmd and click OK.
 For Windows Vista/7:Start→ Type cmd at the start search bar and press the Enter.